Stone Age Base Concrete Coating

For the desired end result, the Basebeton Floor is finished with the special Basebeton Coating (SA Basic-coat WB 2K-PU). This coating consists of two components; SA Basic-coat WB 2K-PU Component A and SA Basic-coat WB 2K-PU Component B. The coating can only be used when component A is mixed with component B. Add component B to component A. Shake/mix this whole and pour mixture through the MP 190 micron sieve. Then mix the mixture well again. The coating can then be applied using a nylon roller. Let it dry for at least five days before it can be used. Consumption is approximately 100 grams per m2.

NB!

After the Stone Age product has been applied to the floor, this floor must never be covered with tape afterwards – because of the composition of the Stone Age product – even when the floor is already in use. This prevents potentially disturbing prints, which can cause damage to the floor.