Application
Suitable as a wear-resistant, colored and seamless floor coating of cement and plaster-bound substrates.
Arturo EP3010 Floor and wall coating is particularly suitable for light to medium load floors, and as a floor finish for:
- warehouses
- Storage and technical areas
- Technical rooms
- Stores
- stables
Product Features/Benefits
- silk mat
- Water vapor permeable
- Colored
- Water dilutable with a maximum of 10% water
- Easy to clean
- low odor
- The product binds dust
- Solvent-free
- Easy to process
Arturo EP3010 Floor coating can also be applied in a non-slip version.
System structure
Application as floor coating:
- Primer: 1st coat of Arturo EP3010 Floor Coating with 10% water addition.
- Floor coating: 2nd layer Arturo EP3010 Floor coating with 5% water addition.
Application as wall coating:
- Primer: 1st coat of Arturo EP3010 Wall Coating with 2.5 to 5% water addition. (depending on structure/roughness of the substrate)
- Wall coating: 2nd layer Arturo EP3010 Wall coating with 2.5% water addition.
Arturo EP3010 Floor and Wall Coating can also be applied in a non- slip powder version. Note: always add the anti-slip powder in the second layer of coating first and mix well before adding the water. For more information about non-slip finish, read the product data sheet carefully.
Consumption
Approx. 150 – 250 g/m2, depending on the structure/roughness of the substrate. Please note: with a broadcast system (for anti-slip as explained in the system structure) the consumption of the layer on the broadcast layer is higher, approx. 700 – 1000 g/m2.
Handy manual
Download the floor coating installation manual before applying a floor coating. This way you can get started with applying the floor coating step by step. You will also receive the manual by email after your order. More tips and inspiration? Visit our YouTube page for all of our helpful how-to videos.
No tools at hand?
Quickly put together your tool packages for all types of floors here.
Substrate
A sleek subfloor is an absolute requirement for a sleek and high-quality end result. For repairs to the subfloor, use Epoxy repair mortar (repairing holes and cracks) and/or Epoxy filler (filling saw cuts and holes). If you want to level out the floor, this can be done with Epoxy Scratch Coat HQ . If you want to level the floor, you can do this with Leveling .
Free* RAL Fan
Order the color chart and choose the perfect color for your project.
Reviews
There are no reviews yet.