Product Description
The 1-component STP adhesive combines powerful elasticity with the advantages of modern SMP technology. Solvent- and water-free, thus highly user-friendly and without damaging swelling of the parquet. Applications 1K STP parquet adhesive with a hard-elastic adhesive bead and a long open time. Limits wood deformation and results in an optically perfect appearance. For indoor applications.
Suitable for
- Chipboard rolls
- Mosaic
- High Edge
- Tapis 6mm to 180mm wide
- Burgundy 8-10 mm to 240 mm wide
- Planchettes 10mm
- Parquet flooring up to 280 mm wide
- Duo plank up to 280mm wide
- Multi-plank up to 280mm wide
Suitable on
- Cement screeds, calcium sulfate-based screeds (anhydrite) or concrete
- New screwed stable particle board P4-P7 or OSB 2- OSB 4 boards
- Gypsum fiberboards
- Parquet suitableegalisations
- Parquet-appropriateUZINunderfloors
- Hot water floor heating Note. All mineral substrates and sanded asphalt floors must be primed with Pallmann P104.
Product Advantages/Features
- Hard elastic adhesive beads
- Complies withVOC regulations
- Goederillenstand
- Good filling capability
- Long insertion time
- Suitableforfloorheating
- Adhesive residuescan be easily removed
- Solvent-free,containsmethoxysilane
- EMICODE EC 1 R PLUS / very low emission
Technical data
Packaging | Plastic bucket |
Package size | 16 kg |
Shelf life | At least 6 months |
Color | Beige |
Consumption | Approx. 800 – 1200 gr/m2 |
Minimum application temperature | Floor temperature 15 C |
Insertion time | Approx. 30 – 40 minutes* |
Sandable | After approx. 24 hours*. |
Mechanically loadable | After approx. 12 hours* |
Final strength | After approximately 5 – 7 days*. |
*At 20 °C and 65 % R.H.
Reviews
There are no reviews yet.